monitoring via the Meraki cloud delivers real-time alerts if a network encounters problems. Remote diagnostic tools enable immediate troubleshooting over the web so that distributed networks can be managed with a minimum of hassle. Rugged/outdoor highest performance Wi-Fi 6 with Multigigabit for tough RF and high-density environments With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR76 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video. Sector antennas are ideal for building mounts as they target the signal away from the interior spaces of the building and focus the energy to the larger outdoor space. This antenna is ideal for exterior building use but may also be used for some mesh network designs. Patch Antenna An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR76 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.

Article 14: The operation of the low-powerradio-frequency devices is subject tothe conditions that no harmfulinterference is caused to aviationsafety and authorized radio station;and if interference is caused, the usermust stop operating the deviceimmediately and can’t re-operate ituntil the harmful interference is clear. GHz 2x2:2 radio and 2.4 GHz 2x2:2 radio offer a combined dual–radio aggregate frame rate of 1.7 Gbps, with up to 1,201 Mbps in the 5 GHz band and 573 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR76 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP. Multi User Multiple Input Multiple Output (MU-MIMO) Static IPs are assigned using the local web server on each AP. The following procedure describes how to set the static IP:Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritized correctly, not only on the MR76, but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones. Omni directional antennas are best for pole mounts applications and for mesh networks. Use omni directional antennas when designingto cover 360 degrees around the Access Point. and 40 MHz channels (802.11n); 20, 40 and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)

This device does not come supplied with a PoE injector - please see accessories tab. Antennas sold separately. With support for features of 802.11ax, the MR76 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 34mmbetween the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritised correctly, not only on the MR76, but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones. ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritised correctly, not only on the MR76, but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones. Self-configuring, self-maintaining, always up-to-date

IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. Rules and conditions for the sale of equipment are determined by the terms of contracts concluded by Cisco or authorized Cisco partners with equipment buyers. All dual-band 2×2:2 outdoor APs (such as the MR74 and MR76) have two sets of mount points: the top two are for the 2.4GHz radio, the bottom two are for the 5GHz radio. Sector/patch antennas have two connectors. Both of these connectors must be attached to the same radio, a single sector/patch antenna should not be attached to both the top and bottom of the access point

Bluetooth Low Energy Beacon and scanning radio

The MR76 provides a maximum of 1.7 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing. This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. party antennas may be used but it is the responsibility of the end customer/partner to ensure operation is within regulatory compliance. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.